scm440 mbaterial hardness

We can provide the most competitive steel products, if you have related needs, please contact service1@katalor.com


>

AISI 4140 Steel Bar 1.7225 42CrMo4 SCM440

AISI 4140 Steel Bar 1.7225 42CrMo4 SCM440. AISI SAE 4140 alloy steel is a chromium molybdenum alloy steel specification widely used in general purpose high tensile steel for components, like axles, shafts, bolts, gears and other applications. Similar to alloy grade AISI 4130 chrome moly alloy steel but with a slightly higher carbon content.

Contact Supplier

SAE-AISI 4140 (SCM440, G41400) Cr-Mo Steel : …

SAE-AISI 4140 (SCM440, G41400) Cr-Mo Steel. SAE-AISI 4140 steel is an alloy steel formulated for primary forming into wrought products. 4140 is the designation in both the SAE and AISI systems for this material. G41400 is the UNS number. It can have a moderately high tensile strength among the SAE-AISI wrought steels in the database. The...

Contact Supplier

SCM440 - steel-grades

SCM440. This page provides SCM440 datasheet, SCM440 mechanical properties, chemical element SCM440, technical specifications of SCM440 steel material properties.

Contact Supplier

EN19 Steel 4140 1.7225 SCM440 42CrMo4 - OTAI ...

Engineering steel material EN19 hardness in HRC Flame or induction hardening can give a case hardness of 50 HRC or higher. EN19 equivalent material with AISI 4140, DIN 42CrMo4 EN 1.7225, GB 42CrMo, JIS SCM440C alloy engineering steel. Mechanical properties of steel EN19 (1.7225)

Contact Supplier

AISI 4140 steel 1.7225 42CrMo4 SCM440 - OTAI Special ...

6. Forging of AISI 4140 Oil and Gas industry Steel material metal. Forging of 4140 steel should be carried out between 2200 and 1650 º F (1200 and 900 º C). The lower the finishing temperature from forging, the finer will be the grain size.

Contact Supplier

JFS Steel's SCM440 and Steel Machining Service - Ju Feng

This material achieves a very good balance between strength, toughness and wear resistance. The chromium content of the alloy provides good hardness permeability, and the molybdenum element imparts average hardness and high strength. SCM440 reacts well in heat treatment and it is easy to process under heat treatment conditions.

Contact Supplier

SCM440H - steel-grades

SCM440H. This page provides SCM440H datasheet, SCM440H mechanical properties, chemical element SCM440H, technical specifications of SCM440H steel material properties.

Contact Supplier

AISI 4130 Steel 25CrMo4 1.7218 708A25 SCM430 ...

AISI 4130 steel alloy is used primarily in the construction of commercial and military aircraft and ground support systems. Alloy steel 4130 is an intermediate strength material. Lighter gauges offer lighter weight but still maintain great strength, making it excellent for auto racing and aerospace.

Contact Supplier

4140 HIGH TENSILE STEEL - interlloy.au

JIS G 4105 SCM440 USA AISI 4140 ASTM A29/A29M-91 4140 ASTM A322 4140 ASTM A331 4140 (Cold Finish) ... Hardness Brinell HB Min 201 233 233 248 269 293 311 ... *Material stocked generally in condition T Check test certificate if critical for end use. Mechanical Property Requirements for Steels Heat-Treated, and then Cold Finished to ...

Contact Supplier

AISI 4140 Steel, oil quenched, 540°C (1000°F) temper, 25 ...

This page displays only the text of a material data sheet. To see MatWeb's complete data sheet for this material (including material property data, metal compositions, material …

Contact Supplier

Steel Grade Equivalent Table (EN, SAE/AISI, UNS, DIN, BS ...

Steel Grade Equivalent Table (EN, SAE/AISI, UNS, DIN, BS, UNI, JIS) The table below compares common grades of materials from various international specifications. Note that materials compared are the nearest available grade and may have slight variations in actual chemistry. ... Hardness and Tensile Strength of Steels Brinell and Rockwell ...

Contact Supplier

AISI 4140 Alloy Steel (UNS G41400) - Materials Engineering

Tempering. AISI 4140 alloy steel can be tempered at 205 to 649°C (400 to 1200°F) depending upon the desired hardness level. The hardness of the steel can be increased if it has lower tempering temperature. For example, tensile strength of 225 ksi cab be achieved by tempering at 316°C (600°F), and a tensile strength of 130 ksi can be achieved by...

Contact Supplier

SCM440H - steel-grades

SCM440H. This page provides SCM440H datasheet, SCM440H mechanical properties, chemical element SCM440H, technical specifications of SCM440H steel material properties.

Contact Supplier

4140HW Alloy Steel Technical Data

4140HW meets AISI4140 standards and has improved hardenability and strength in heavier cross-sections. Alloy Description. TimkenSteel’s 4140HW grade is a fine-grained, low-alloy steel that offers. optimum heat-treat response in heavier cross-sections. You find 4140HW in a. variety of bar and tubing applications in quenched and tempered conditions.

Contact Supplier

AISI 4140H Alloy Steel (UNS H41400) - Materials Engineering

Introduction. Low-alloy steels, on the other hand, are used to achieve better hardenability, which in turn enhances other mechanical properties. AISI 4140H is an H-steel grade alloy steel, commonly called AISI 4140H chromium-molybdenum steel. The following datasheet …

Contact Supplier

Raw Material and Gear Precision Grade Equivalent Tables

For carburizing (case hardening), SCM415 is normally used. If a harder material is required, SNCM220 and/or SNCM420 is normally used. Hardness values are determined by production condition. For the actual expected hardness value, please refer to the recorded gear quotation.

Contact Supplier

SCM440 datasheet,SCM440 chemical,SCM440 heat treatment

SCM440 datasheet, SCM440 mechanical properties, chemical element SCM440, technical specifications of SCM440 steel material properties. SCM440 performance specifications.

Contact Supplier

HIGH TENSILE STEEL AISI 4140 - S&T Stainless

HIGH TENSILE STEEL – AISI 4140 AISI 4140 Chrome - Moly High Tensile Steel, generally supplied hardened and. tempered to Condition “T” in sections. up to 100mm, with a tensile strength of 850 – 1000 MPa and aiming for this strength range in larger sections. It offers a very good balance of strength, toughness and wear-resistance.

Contact Supplier

SCM440 - bssteel.th

SCM440. Low-Alloy Steel. ... Hardness. สภาพอบอ่อน (Annealed) หลังการอบชุบ (Tempered) 255 HB MAX 30-38 HRC ตัวอย่างการนำไปใช้งงาน (Application) เหล็กปาดผิว (Finished Plate)

Contact Supplier

Microstructures and Mechanical Properties of …

The average hardness of all the specimens was more than HRA70. The specimen with austempering at 830°C for 25min and salt bath at 290°C for 30min had bigger grain size of the austenite and retained £ phase of 11.4vol%. It also had higher hardness and strength.

Published in Materials Transactions · 2013Authors Cheng Yi Chen · Feiyi Hung · Truansheng Lui · Lihui ChenAffiliation National Cheng Kung UniversityAbout Alloy steel · Austempering

Contact Supplier

Alloy Steel for Structural Use|Special Steel|From the type ...

Home > Products > From the type of steel > Special Steel > Alloy Steel for Structural Use. TEL:81-6-6613-2362 5-26, 5-Chome, Nankominami, Suminoe-ku, Osaka, 559-0032 ... hardness Annealed hardness (HRB) Hardening Hardening; Hardness(HRC) Temperature(℃) ... For more information on Nisshin Steel materials, click the link below. Click here for ...

Contact Supplier

SCM440 Chemical Composition, SCM440 Mechanical …

It mainly introduce the chemical composition,mechanical properties, heat treatment, processing performance and performance standards about SCM440.For various specification of steel production and processing to provide the standard production,we have the professional experience for SCM440.We can also produce it according to the AISI, UNS, SAE, ASTM, DIN, JIS technical standard.

Contact Supplier

S45c Steel Hardness, S45c Steel Hardness Suppliers and ...

Hardness S45C. Quick Details Name Hardness S45C Place of Origin :Liaoning,China Brand Name :Dongbei Tegang Shape :round bar Material Carbon Structural Steel Steel Grade ASTM 1045/AISI 1045/UNG 10450/JIS S45C/DIN 1C45 Size :Diameter:10mm~300mm Application used in making bent axle, mandrill, transmission shaft, piston rod, connecting rod,...

Contact Supplier

4140 Steel Plate Precision Grinding, Inc.

Due to it’s good hardness penetration and uniformity flame hardening, induction hardening, or oil hardening can considerably increase the wear resistance of 4140 steel. 4140 PH has the same industry standard chemistry as 4140 plate HR plate but with an industry …

Contact Supplier